Decorating a wedding with balloons: an inexpensive and beautiful way to decorate

As one of the most important and happiest days in life, a wedding requires bright, lush decoration. The wedding design with balloons is intended to fully reflect the happy mood and significance of the celebration.

Compositions and figures made from balloons are always an appropriate option for decorating the halls of cafes or restaurants, tables, photo zones and even transport for a wedding. In the hall or on the street, balloons for a wedding will create the atmosphere of a real fairy tale thanks to their weightlessness and variety of colors.

A new look at gift compositions

To begin with, it is worth returning to traditions. A gift and a bouquet are a standard congratulation for newlyweds. Therefore, you should pay special attention to the choice of what you give. Often an unusual item is very expensive, and you have to choose from an assortment of gifts that the guest can afford to purchase.

In this case, an original bouquet will help complement any wedding gift.

A bouquet of balloons for a wedding is an unusual composition that will appeal to young people. And you can even make such a bouquet with your own hands. It is multi-colored balls of different shapes, twisted in the form of flowers on a stem. Such bouquets look beautiful both in baskets and decorative vases.

You can select special small balls in the form of buds and stems and arrange them in the form of a bouquet on a stand.

They have the following advantages over other types of decor:

• Festive aesthetics: balloons always look bright, so they look great at a party of any level.
• Brightness and freshness: unlike flowers, balloons will not lose their festive appearance after an hour and a half, but will delight you until the end of the celebration.
• Modern possibilities: balls can be round and elongated, with neon design, seals and inscriptions, and the color range of this decoration is completely limitless.
• Simplicity of design: even for the most complex compositions, special preparation of the festive hall is not required.
• Affordability: this decoration looks very decent, but at the same time you can afford it regardless of your financial capabilities.

Balloons for a wedding are an ingenious and simple decoration for a celebration. They are appropriate for the most magnificent holiday, and will create a truly solemn atmosphere even in a nondescript hall with limited financial resources.

offers inexpensive wedding hall decoration with balloons in Moscow - we have prepared for you the most original and effective solutions that you will not buy anywhere else.

Useful video: do it yourself

This video describes in detail how to create a bridal bouquet from balloons - master class:

For example, a bridal bouquet with balls twisted in the shape of multi-colored daisies looks beautiful.

1. We take the balls and stretch them.
2. Then we inflate and deflate the balloons so that the length is about 60 cm.
3. Then, using the resulting inflatable sausage, we create five inflatable segments using twisting. That is, in fact, we divide a single ball in the form of an inflatable oblong stem into five segments.
4. Then we twist these segments into a ring and twist them in half again. And at the end we get two bubble petals. We repeat the same with the second ball of a different color.
5. Then we insert the petals of one into the other ball. We straighten it out, and we get something like a watermelon from different inflatable strips.
6. We begin to lift one petal and insert the next petal into it. Turn over and repeat the procedure.
7. We place a third small ball in the middle, inflate it, and this will be the middle of the chamomile.
8. We remove one part of the ball deep into it, and leave the soft bubble on the outside in the form of a stamen.
9. Then we take and inflate a green ball - this will be our stem, we bend the oblong inflatable green stem and by twisting it we form two leaves.
10. Then we attach the stem from the back of the flower, and our chamomile is ready.

This technique allows you to combine different colors and create a multi-colored bouquet, and make all the flowers the same size.
The flowers can then be combined to create an inflatable bouquet in the shape of daisies. Moreover, the center of the flower can be made from a ball of any color, the main thing is that it is beautiful in color and goes well together.

Useful video: performing aerial heart

A very beautiful present is a heart for a wedding; it can be given either separately or as an addition to a bouquet arrangement.

1. We take one red modeling ball size 260, two dark green size 160 balls, a white modeling ball size 160 and a small piece of yellow size 160 ball and a pump for inflating the balls.
2. We take a white and yellow SDM (modeling ball). We do not inflate the white ball completely, leaving the tip lowered by 5-6 fingers. We inflate the yellow ball by pumping it a couple of times.
3. We take a white ball and make a bubble, then using twisting we make a pinch-twist, then we repeat the combination of a round bubble and a pinch-twist (and so on three times), and we get a flower.
4. We make two more such flowers using the same rule. The core will be made of a yellow ball, then we will make a pinch twist. Insert the yellow core into the white flower. And we do the same with the remaining two flowers.
5. Now we make the heart. Take the red ShDM ball, stretch it and inflate it to the end. Let the air out a little from the tip, make a bubble and then a pinch twist, then repeat and make two round bubbles and two pinch twists in the same way. Then we wrap the tip around the pinch twist.
6. Then we take our green ShDM. We do not inflate completely; before tying the balloon, it is necessary that the tip remains. We make three loops from the green stem.
7. In the red ball, we direct the middle towards the pinch-twists, hold the middle and wrap it around the tail of the green ball. Those. we get a heart with green leaves attached in the central part.
8. Then we repeat the same operation with three more petals (on the other side of the same stem). Using the second green stem, we twist the ball and wrap it around the heart, making a small bubble and three petals. As a result, we get a heart, three pairs of three green petals and three white flowers, which we attach to each pair of leaves.

Where should a newbie start?

The first thing you need to do is decide what flowers to make and how many of them there will be in the composition. There are also two ways to make a bouquet of balloons. A little later we will talk about each of them in more detail.

According to the first technology, flowers are made from ordinary balls that are simply connected to each other. Using the second method, you can make more original compositions. But here the whole difficulty lies in the correct twisting of the special balls. It is not necessary to use any one of the methods; they are perfectly combined with each other.

As soon as the technology is chosen, you can already calculate the amount of material needed and go to the store to get it.

What do you need to make a bouquet of flowers from balloons?

• Balloons are, of course, the most important element. Depending on the chosen shades, you can imitate a variety of flowers. For example, you can make daisies from white balls, cornflowers from blue ones, irises from purple ones, and tulips or roses from red ones.

To make one flower you will need two balls if they are long. One green is for the stem, and the other is for the petals, but of a different color. If you want to make a flower without twisting from ordinary balls, then you already need at least six of them.

• A manual or automatic pump will be very helpful, especially if you want to make a huge bouquet of balloons for your birthday. But you can completely do without it, inflating the material in the traditional way - with your mouth. Just spend more time.

• Use a helium balloon if you want the flowers to stay in the air.

• Threads will come in handy when making a bouquet of ordinary balloons.

• Decorative elements (butterflies, satin ribbons, beads) will not be superfluous. Use them to your liking. Although traditionally inflatable compositions are made only of balloons.

When all the materials have been selected, you can begin the fun part. Some useful tips may come in handy during your work.

Variety of types of balloons for weddings

Decorating a wedding with balloons is a great opportunity to transform any celebration and make it amazing, regardless of the chosen style and color scheme. There is a large selection of these simple but popular inflatables.

Classic

Made of latex, usually round or oval in shape , in a single color. Using these balls, figures, arches, patterns, and garlands are constructed. This is the basis and main material for creating interesting compositions.

Balloons with drawings

An excellent design option. Any words of congratulations, wishes, drawings, names, dates are applied to the ball.

April 13, 2022 at 12:59 pm PDT

Figured balls

In most cases, for weddings they are presented in the shape of a heart. Usually red, pink, white or gold. They are placed as a separate composition in the form of bouquets and fountains.

May 10, 2022 at 1:35 PDT

23 Jan 2022 at 7:09 PST

March 24, 2022 at 3:24 am PDT

At the most touching moment - the dance of the young people, press the button on its remote control. The balloon will burst, and all the tinsel will spin in the tender dance of the bride and groom.

First wedding dance in fairytale tinsel

Balls with tulle

Large helium balloons are wrapped in tulle. An image of a bride appears, fluttering in the air. For greater effect, bright tinsel and LED light bulbs are placed inside. It is important to understand that tulle should not hide the color of the ball, but only dull it a little. The knot that secures the wrapper also deserves special attention. It is decorated with flowers and ribbons.

An amazing combination of tender and airy

Giant balls

A new trend in design. The peculiarity is that such a ball, due to its size, looks like a complete composition. Choose the color, placement, and the decor is ready.

Jul 28, 2016 at 5:38 PDT

Recommendations for making an inflatable bouquet

Balloon bouquets are actually fragile, so you need to be very careful when making them. One careless movement - and the composition will burst, and all the work will go down the drain:

• Do not hold the balls close to your face.
• It is advisable to cut your nails and round them with a nail file.
• Inflate and twist the balloons without fanaticism.
• Remember that even experienced craftsmen fail and the material breaks.
• Only special long balls are suitable for bending and twisting.
• If you want to make drawings or writing, use water-based markers. Alcohol markers corrode the balls and they burst.

Preparing materials for a flower from ordinary balls

Ordinary balls are good because even children can make crafts out of them. And it’s much easier to find such material. So, what do you need to make a bouquet of balloons with your own hands?

• One ball for the core. It is better to take a light color: white or yellow.
• Five to six balls, different in color from the core.
• Threads for tying.
• Scissors.
• Helium pump or tank (optional).

Launching wedding balloons into the sky is a significant and beautiful ritual

The newlyweds of the world know a huge number of ways to launch “bright spots” into the air. Come up with your own. Figure out when the right moment will happen. Will this happen in bright daylight? Or in the evening, when sky lanterns bring more emotions?

The most spectacular thing will be the launch of luminous balls in the dark . An unforgettable sight will open: a bright flying cloud cutting through the night sky. And under the ceiling of the banquet hall they also look romantic and beautiful.

Photo of LED balloons for a wedding – brightness and radiance

Of course, it's worth thinking about quantity. And who will release the balloons: young people, each guest, or will it be the launch of balloons from the net.

What do newlyweds say when they release balloons into the sky? Most likely, vows of love and fidelity. It is important that the words spoken come from the heart and are sincere.

The tradition of launching helium balloons is always accompanied by touching words and romantic music.

Old-fashioned rituals have been replaced by another new-fangled trend - launching the bride’s surname into the sky on balloons launched with one’s own hands, as one of the symbols of parting with girlhood and entering into family life. What could be more exciting if the bride takes her husband's last name? Attach a sign with the bride's name to the balloons or order a stamp on one large balloon. Launch this symbol with your bridesmaids.

Goodbye girlhood. And balls

Balloons are perhaps a relatively inexpensive and traditional way for the bride and groom to decorate their wedding celebration. The event will create the illusion of airiness, and a variety of compositions will place those present in a soaring atmosphere.

Making a bouquet arrangement from round balls

First, let's inflate those balls that will be the petals of the flower. Try to make them the same size. To prevent the bouquet of balloons from deflating during the process, it is better to tighten the tail into a knot rather than tie it with a thread. Let's take five pieces. Usually this amount looks the most attractive.

Let's tie only two balls together. Now let's fasten the three. There should be two bundles. We put one into the other and fasten it with thread. The result was a blank of five petals. If you want to use six balls, then tie them in twos. First, fasten two pairs together with a thread, placing them diagonally with each other. Then do the same with the third ligament.

Let's move on to the middle of the flower. Inflate the balloon so that it is smaller than the others. Insert it into the center of the petals and tie it well with thread. Usually it is to this ball that a ribbon is tied when they want to decorate the walls or ceiling. The rest of the flowers for the bouquet are collected according to the same pattern. When they are ready, assemble them into a composition, fastening them together with thread.

You can make multi-layer flowers by laying out several rows of petals. These balloon bouquets look very impressive. The photo above shows the entire process of their manufacture. As you can see, it is no different from composing a flower with one row of petals.

Making bouquets of balloons for modeling

Let's start with the petals. Therefore, first we will inflate the pink balloon. Now you need to let the air out of it a little so that it does not burst and curls easily. We tie the ends tightly together. Opposite the resulting knot we make a twist. We put the halves of the ball together, visually divide it into three equal parts and make two twists. The craft should resemble a bunch of six sausages.

We connect the folds together and twist them. It's better to help yourself with both hands. This is the most difficult stage in assembling a flower. If it is filled with air, it may burst. Therefore, it is better to take the material with a reserve so as not to run to the store again and have time to make bouquets of balloons on time. The photo instructions above clearly show how to properly make flower petals.

Now let's move on to making the stem. To do this, let's inflate a green ball. You must leave a small tail at its tip. This is done so that the ball is pliable during operation and does not burst. We retreat a few centimeters from the end and twist it. We tie the tail of the ball to it.

We drag the stem blank through the center of the petals. We leave its convex part above the flower. We twist the middle of the stem (about 10 centimeters) several times and form leaves. Using the same scheme, we make the rest of the flowers and collect them into the composition. Now you can safely give a bouquet of balloons for your birthday!

Balloon decoration for a wedding - an affordable and versatile type of decoration

There are many options for wedding hall decoration. Before making your choice, familiarize yourself with the main types of compositions . It will be easier for you to imagine what you want and explain it to the decorator.

In most cases, when decorating a wedding, the following compositions are used :

• chains of balls;
• Garlands;
• hearts, rings, swans;
• bouquets of balloons on the table;
• floor bouquets;
• racks;
• arches and gazebos;
• ceiling decorations;
• surprise balloon or confetti balloon;
• a wall for a photo zone made of balloons;
• giant balls.

To make your wedding composition look impressive, arrange each of its elements thoughtfully and carefully.

All parts should be in harmony not only with each other, but also with the overall style of the wedding

There are three main zones in the decor:

The central table of the newlyweds is the place where all the attention of guests, photographers, and video operators is concentrated. Therefore, direct all your efforts to designing this particular area. Behind the main heroes of the occasion, a large composition is placed in the form of one or two hearts, wedding rings, swans, and arched compositions are constructed. It is worth thinking about combining balloons with fabric, ribbons, and flowers.

Photos of wedding decorations with balloons and fabric

Guest area and dance floor . There are many solutions for decorating this area. The most common is the placement of so-called fountains or fireworks on guests’ tables. Consider the length of the thread; the balls should not block the visibility of guests.

Posted by SYL wedding photography (@sylweddingphotography) Aug 18, 2022 at 11:55 PDT

Attach aerial garlands above the ceiling. Place one or more surprise confetti balloons on the dance floor. Pop one during the first dance of the newlyweds, the rest are for guests. Having helium balloons floating freely on the ceiling is definitely an interesting solution! Add LED elements there and get an incredible effect. And the composition “bride and groom made of balloons” will swing funny under the influence of air, creating the illusion of a dancing couple.

Photos of bride and groom figures made from balloons

Entrance to the banquet hall . It is decorated so that guests will never pass by. Most often, arches or garlands of balloons are installed above the entrance, fountains and various figures are placed.

Master class on how to make a heart out of balloons for a wedding with your own hands

The process of creating a wedding heart from balloons on your own will give you a lot of pleasure. And creative work will further unite the newlyweds as a future family.

Before you start work, think through the details. How and where will the structure be located? What color, what size? Will it be one or two hearts? Place it schematically on a sheet of paper. As an example, place one large heart behind the young ones, and place bouquets of helium balloons with hearts on the sides. Select mounting option. If it is without a frame, then you need to very painstakingly set the heart shape so that everything looks symmetrical. For a structure with a frame, it is enough to tie the balls with strong threads. To make it you need :

• balls (the number depends on the size of the frame);
• wire (no more than 3 mm);
• scotch;
• threads

Manufacturing process:

1. Use wire to create a heart shape.
2. Bring the edges together and secure well with tape. Do not skimp on the number of skeins to avoid the collapse of the entire structure at the most inopportune moment.
3. Start making ball joints. They are called “fours”: inflate two balloons, fasten them with a rope, then attach another pair. It is most convenient to connect when inflating, tying them together without thread. Inflate in such a way that they do not push each other out, but also tightly touch the edges. Prepare about forty of these parts. Sometimes it turns out even more.
4. After making the connections, proceed to attach them. Take the first pair of fours and place them on the base so that the wire runs through the middle of the ball joint.
5. Scroll a couple of times to secure. Repeat the action.
6. And in this way place all the parts of the connections. Pay attention to symmetry.
7. Straighten the balls in the desired direction.

Photo of a heart made of balloons for a wedding in red – the color of love.
As you can see, there is nothing complicated. Don't be afraid to experiment, watch a few video tutorials. Choose the best option for yourself. And then you use the acquired skills when making numbers to celebrate the anniversary of your first child.

And here is a detailed video on how to make hearts from balloons for a wedding with your own hands:

Making a stand for a bouquet

We align the flowers in height. We tie the ends of the stems into a knot. If necessary, deflate the balloons a little. Let's put the bouquet aside for now.

Inflate five small balloons. We collect them as we did with the petals for simple flowers. We do the same with five larger balls. Let's make a weight. To do this, you need to pour a little water into a separate ball.

Let's start assembling the stand. Again we take a bouquet of balloons. We tie a weight to it. We first attach large balls to the tip of the stems, and then small ones. Now the bouquet can stand on the floor or table.

How to decorate an inflatable bouquet

If you want to surprise with unusual bouquet arrangements, then additionally make a bow or beads from the balloons. Flowers in inflatable baskets also look very beautiful. But a ball in a ball will definitely help you hit the spot! It is unlikely that anyone will remain indifferent to such a work of art.

Make your loved ones happy, give them bouquets of balloons for Mother's Day, name day, March Eighth, New Year and other holidays!

Decor features

Decorating with balloons for a wedding is a multifaceted area of ​​activity. And for a wedding, this decor option exists in various forms:

• Selection of inflatable balloons: these can be colored balloons (white, red, pink, gold, etc.), as well as foil, with inscriptions, helium, neon, with printing, etc.
• Type of decor: classic arches, heart-shaped, figures, fountains and unique compositions of luminous balls - there are a lot of decoration options for a wedding.
• Decoration location: balloons can be used to decorate a restaurant hall, a wedding venue outdoors or indoors, a car, etc.

Of course, launching helium balloons into the sky is a beautiful ritual, and even balloons simply laid out around the hall will look very festive. But a wedding is the case when the most extraordinary and memorable decisions are relevant.

It's easy to contact us! Call us at +7 (985) 343-45-45

Types of balloon bouquets

What will a wedding bouquet of balloons look like? It depends on the wishes of the newlyweds. Using the tips of experienced craftsmen or their help, you can independently make the most unexpected and original compositions, which will include:

All of them are made exclusively from multi-colored balloons. The peculiarity of each bouquet is its composition and design. The flowers are attached to a stand or tied with a ribbon, and the composition is complemented with a toy or inflatable figures.

To decorate a holiday, you will need a fairly large number of balloons, most of which are collected into garlands or used to build an arch under which a photo shoot is held. But unusual bouquets will also become an amazing decoration that can create and maintain an atmosphere of fun.

Using a special working technique, the craftsmen create bouquets of balloons, which are installed in the hall and in the photo shoot area.

After all, such compositions are assembled on a stand, the manufacture of which also requires only balloons.

Another way to decorate a room is to arrange vases with balloon flowers. They will become more than just decoration - they are a wonderful backdrop for an unusual photo shoot. And, of course, a wedding requires a huge number of flowers.

Ordinary balloons will become the basis for creating unique bouquets that will retain their original appearance for several days and even weeks. Floor bouquets will be an excellent element for decorating a banquet hall and photo shoot area. Balloons filled with helium will decorate tables for guests.

The long threads that tie the base of the balls will help them stay high enough without interfering with the invitees to communicate and without covering the faces of the interlocutors.

Why should you contact a professional company?

In order to decorate a wedding with balloons, it is better to turn to professionals, since without special knowledge and skills it is difficult to create something unusual from this material for the following reasons:

• Fragility of balls: It is a well-known fact that balls are easily damaged. And when creating a composition, just one bursting balloon can lead to the destruction of its important elements.
• Difficulty of composition: without experience, you will not be able to create a large-scale figure on your own - it will be difficult to avoid mistakes and complete the composition on time.
• Design: Aero designers create unique solutions in the face of excess supply in the market and produce amazing compositions using their knowledge and skills.