DIY wedding car hood decor - like decoration with flowers and balloons

At the beginning of the wedding, the groom goes to pick up the bride, and then they go together to the place where the marriage is registered. For these events, a real wedding motorcade is equipped, consisting of beautifully decorated cars of the newlyweds and wedding guests.

To give a wedding string of cars a dignified and luxurious look, it is enough to decorate the wedding car with colorful flowers, multi-colored satin ribbons, airy tulle bows, wedding rings and other accessories.

DIY wedding car hood decor - like decoration with flowers and balloons

At the beginning of the wedding, the groom goes to pick up the bride, and then they go together to the place where the marriage is registered. For these events, a real wedding motorcade is equipped, consisting of beautifully decorated cars of the newlyweds and wedding guests.
To give a wedding string of cars a dignified and luxurious look, it is enough to decorate the wedding car with colorful flowers, multi-colored satin ribbons, airy tulle bows, wedding rings and other accessories.

Ways to decorate a wedding car

The easiest and most inexpensive way to decorate your car is to buy several multi-colored satin ribbons and attach them to the hood. This can be done in different ways:

• in the form of several longitudinal stripes (as an option - to imitate the Russian flag);
• in the form of the letter V - from the middle of the hood to its extreme points or doors;
• You can decorate only one side of the hood diagonally.

Decorating a car with balloons - in the form of figures or garlands - will cost a little more.

The most expensive way is to decorate the car with fresh flowers. Of course, you can replace them with artificial ones, but you will have to run a lot in search of specimens that would most closely resemble the real ones. It should be borne in mind that high-quality synthetic flowers are not cheap.

However, regardless of the amount of money invested in car decor, one decoration is required on every wedding car. These are wedding rings. Some people prefer to buy them ready-made in a salon, while others find it easier to spend very little money and time - and a wonderful decoration is ready!

How to decorate with fresh and artificial flowers

On city streets you can often see elegant and colorful wedding processions, decorated with floral arrangements made from fresh and artificial flowers.

This is not surprising, because flowers are considered a symbol of love, vitality and enchanting beauty. Therefore, the bride and groom most often go to their wedding in wedding cars decorated with bright and elegant flower arrangements.

For a stylish and beautiful look, wedding cars can be decorated with the following types of floral decoration:

• a single bouquet on a car bumper;
• a basket with fresh or artificial flowers;
• a flower garland of artificial flowers, secured so that its “tails” hang from the rear bumper to the ground;
• single floral elements attached to satin ribbons on the hoods of wedding cars;
• delicate compositions of fresh or artificial flowers in combination with airy tulle, attached using special suction cups to the hood of a car;
• small floral arrangements with bows made of satin ribbons or snow-white tulle attached to car door handles;
• perky decorations made from single faux buds attached to windshield wipers;
• original floral arrangements of artificial flowers located on car wheel rims. Cars with this design resemble a blooming magical meadow on wheels;
• touching wedding doll against the background of a flower arrangement.

It is better to choose decorations for a wedding car from elegant flower arrangements made up of artificial single flowers with green leaves.

Such floral bouquets are much more practical than their living counterparts and there are usually no difficulties when attaching them to a car.

You can decorate your car with freshly cut flowers, especially since bouquets of living gifts of nature look much more impressive on the varnished and glossy surfaces of the car, but to attach them to the body of the car, it is best to seek help from professional florists.

In addition, to preserve the freshness of fresh flowers and attach them to the car, you will need a lot of special floral devices, such as test tubes with vacuum suction cups, adhesive tapes, special moistened sponges, and treating flowers with special anti-wilting agents. If you fix living flower bouquets without all these floral “tricks”, the flowers will quickly fade and lose their luxurious appearance.

It is much easier and simpler to decorate the wedding procession with elegant bouquets and garlands of artificial flowers.

Moreover, it is quite possible to make such decoration yourself and with your own hands. When composing a flower arrangement, it is best to use all your imagination and imagination.

You should be guided by the main rule of wedding design: the decoration must coincide with the general idea of ​​the color design of the wedding. To make your own decoration for the hood of a wedding car with your own hands, you need to prepare in advance:

1. A variety of artificial flowers: roses, daisies, peonies, irises and others of the choice of the bride and groom.
2. Green leaves or twigs.
3. Spikelets of cereals.
4. Satin ribbons.
5. Airy tulle or delicate chiffon in quantities from 2 to 3 m.
6. Thick cardboard.
7. Plastic rings.
8. Adhesive tape or tape.
9. Transparent organza.

For an autumn wedding, it is quite possible to create a floral arrangement from artificial carved variegated maple leaves in red or yellow colors.

Independent production and installation of wedding decor from artificial flowers in the form of bouquets or single flowers is carried out in the following order:

1. A blank of any shape made of thick cardboard is decorated with a fabric of a suitable color and fixed on the reverse side with transparent tape.
2. It is best to place large specimens in the center of the cardboard base, and fill the middle with small flowers.
3. Another option is to place one large flower in the center and fill the remaining free space with small flowers or green leaves.
4. The finished decor remains attached to the hood of the car.
5. If you plan to decorate satin ribbons, which are usually placed on the hood of a car, with single flower boutonnieres, you must carefully attach the ribbon to the car. To do this, the side edges of the tape are processed and elastic elastic bands are sewn onto them, which allows you to firmly fix the decoration under the hood of the car. Flowers are securely attached to satin ribbons using superglue or adhesive transparent tape.
6. In a similar way, you can attach a diagonal flower garland to the entire hood of the car and extend it to the windshield.

An original decoration for a wedding car will be a decor made of delicate pink and bright red roses.

Each rose is tied with an airy bow made of weightless snow-white tulle or organza and attached with automobile tape to the hood, trunk and roof of the car.

When decorating wedding cars, it is important to remember several design techniques: dark cars are decorated with light accessories in golden or silver colors for expressiveness.

For white and light-colored cars, you should think about decor from bright flowers and ribbons, which are sure to attract attention with their elegant and elegant appearance.

Choosing material to decorate the car

Wedding cars are usually decorated with:

Video about decorating wedding cars

Before purchasing items for decoration, you should think about what color scheme they should be in. It is advisable that they match not only the car itself, but also the clothes of the bride and groom. It is better to give preference to contrasting or harmonious colors and shades. So, on a dark car, decorations in delicate, light, pastel colors will look great, and on a light car, bright, rich, pink or red decorative elements will look great.

Decorating wedding cars with flowers

To create a sophisticated look for a wedding car, it is advisable to use decorative materials in moderation. If we are talking about floral accessories, then it is not at all necessary to decorate the entire car with them. Although such options for “movable flower beds” are also possible:

But cars decorated with floral arrangements around the hood, doors and, possibly, the roof (if wedding rings are expected) look more elegant.

Decoration with fresh flowers

Decorating a wedding car with fresh flowers requires special attention, because by the end of the run from the bride’s house to the registry office, and then to the place of celebration, the flowers may lose their decent appearance. Under the influence of carbon dioxide, road smoke, sunlight, too high or low temperatures, they fade quite quickly, so you should calculate in advance how many flower arrangements you will need, and for each of them purchase special nutritional compositions in test tubes. These tubes have suction cups for a secure fit and come in a variety of colors so you need to choose one that matches your machine.

You can also treat the flowers themselves with a special composition - this will allow them to remain fresh for quite a long time.

It is worth noting that there is no need to decorate the car with expensive roses or lilies - seasonal flowers may be quite suitable for this. Decorating with chrysanthemums, daisies, gerberas or wildflowers also gives a delicate and elegant look.

Decoration with artificial flowers

Artificial compositions have their advantages:

Flowers attached to wheel rims look quite impressive. Of course, they must be fixed here super firmly.

How to attach flower arrangements to a wedding car?

Flower arrangements are attached in various ways. For example, as fasteners you can use suction cups, special ready-made fasteners, or ribbons with which flowers are tied to door handles.

In order to decorate door handles, you should cut out a fairly long rectangle from tulle or simply take a ribbon, thread it along the edges and assemble it into a boutonniere. A small flower is placed in the middle of the boutonniere.

To decorate the hood, you can also cut out a frame of the desired shape and size (for example, a heart or an oval) from thick cardboard. The frame is carefully wrapped with tape so that no unsightly pieces are visible from under it, and flowers are attached to the top. In this case, you should place the largest and brightest of them in the center, and the smaller ones around them. For volume, the frame is decorated with leaves, ears of corn and other decorations. The frame itself is attached to the car with tape or tape, which must be pulled tightly around the hood.

Decorating a wedding car with ribbons

Wedding car roof rings

If you do the decoration of the wedding car yourself, then you can make two beautiful rings - a symbol of fidelity and happiness - in a fairly short time and without much expense.

For production you will need:

Work order:

What ideas do you have for decorating wedding cars? Share them in the comments.

Source

General Tips

When choosing decor, it is important to remember a few general rules regarding wedding cars:

1. The bride and groom's car should preferably be white or black.
2. Guest cars can be of any color, but in the column it is better to have white, black and silver models first, followed by brighter shades.
3. It is better to use jewelry of no more than two or three colors; a more colorful range will look tacky and tasteless.
4. All elements must not obscure the driver's view.
5. If cars are rented, then you need to clarify whether they can be decorated and with what. It is advisable not to choose too adhesive decor so as not to leave marks.
6. The style of the entire tuple must be the same.

Photo of a simple and beautiful DIY wedding car decoration

What can you use for decoration to simply and tastefully decorate a car for a wedding with your own hands:

• ribbons made of any material;
• fabrics: chiffon, tulle, organza;
• flowers: fresh or artificial;
• Balloons;
• figurines and figures, plush toys;
• paper decorations: pompoms, posters, appliques;
• comic numbers with inscriptions and drawings.

Decorating a car with your own hands for a wedding is a significant saving on the budget of young people, especially if you rent a car. Plus - this is an opportunity to show imagination and creativity, achieving exactly the result you want.

Decor with balloons

A traditional type of decoration for wedding cars includes the popular decor of multi-colored balloons. You can make such a stylish and original decoration from them that the car for the bride and groom will have a dazzling and luxurious look. To do this, balloons are combined into truly elegant and original compositions. For example:

Decorating wedding cortege cars with balloons is considered one of the most inexpensive and fastest ways to decorate.

To properly decorate a wedding cortege with balloons, you need to prepare in advance:

For reliable fixation, the assembled compositions are tied with thick braid or twine stretched between two supports on the hood, bumper or trunk of the car. When creating “airy” compositions, it is important to maintain a sense of proportion and not use more than four colors in decoration at the same time. When choosing balloons for wedding decoration, you should pay attention to the quality of the material: the denser it is, the more reliable the decoration will be.

When decorating a wedding car, you should think about how the chosen decoration does not create inconvenience for the driver while driving on roads.

The choice of type of decoration for the wedding procession of the newlyweds depends largely on the make of the car, its color and model. Vintage cars are not recommended to be colorfully decorated with hearts or other romantic figures - minimal decor is possible for them, which only reminds of participation in the wedding procession.

This video will teach you how to make a wedding decoration on the hood of a car with your own hands:

If the newlyweds decide to rent a limousine for their wedding, then it is enough to decorate such a status car with several satin contrasting ribbons or figurines of the bride and groom.

A large amount of decoration is suitable for simple cars, while luxury and remarkable cars require less decoration. Knowing this rule, you can make your wedding car stylish and show your impeccable taste. How would you like to decorate your wedding car?

Source

Master class on decorating a car for a wedding using tulle with your own hands

Tulle is quite often used as decoration for wedding cars - it is a relatively inexpensive fabric, and it also looks chic as part of the wedding decor.

As a rule, the fabric is most often used as hood or roof decor.

Decorating the hood of a car with tulle is done very simply - the fabric of the desired color is stretched diagonally from the windshield to the bottom of the hood so that it expands from below. The lower part of the fabric slams shut with the hood, the upper corner can be attached with an elastic band to the side glass or secured with double-sided tape. The fabric alone will not look complete, so it needs to be supplemented with flowers or balloons. Another decorative option is two strips of tulle, stretching from different sides of the car to the center of the hood.

Photo of DIY car decoration for a wedding made of tulle

In this case, double-sided tape or rubber bands will again help. Strips of tulle can be tied with ribbons at equal distances from each other or decorated with flowers .

Decoration of wedding cars. Theory of floristry. No. 1.

Several types of car decoration can be distinguished: Type 1. Compositions on a car corse (on the hood or radiator grille) Type 2. Compositions on an oasis of rings and hearts, wreaths Type 3. Garlands Type 4. Openwork compositions with silicone mini-suction cups Type 5. Panels on hood (flat work) Type 6. Work of unusual design Type 7. Decoration of car doors/mirrors

1. Compositions on a car corse (on the hood or radiator grille)

Location of tracks:

The compositions are assembled in special fittings with a silicone suction cup, which adheres well to the hot hood and has additional levers for fixation. Autocors larger and smaller, for different sizes of compositions.

The flowers in the composition are those that can withstand temperature changes and are resistant to gusts of wind. For example, roses, spray and single-headed chrysanthemums, anthuriums, cymbidiums, sunflowers. Tulips, freesias, irises, and flowers with delicate petals are not placed.

Sometimes bunches of flowers are additionally reinforced with wire in order to maintain their position during a gust of wind. Flowers such as chrysanthemums, roses do not need to be strengthened if they are placed deep, and flowers with a short stem. Some flowers are located away from the main gust of wind (for example, lilies).

It is necessary to additionally secure the car corse with ribbons in the color of the hood or in the color of the composition, and fishing lines. They are tied to hooks under the hood in the front middle and in the corner near the mirror. Drivers then simply cut the tape and remove the compositions themselves.

2. Compositions on the oasis in the form of a wreath/rings and a heart/hearts

The basis of these compositions is the oasis shape in the form of rings or hearts (hearts).

Rings and hearts can be hollow or solid. And the cost of work also varies depending on the shape and size.

Distribution of work: 1. on the passenger side 2. in the center of the hood (usually large single work) 3. on the radiator grille The base is attached to the hood using suction cups, there are even special holes for them.

Sequence of collecting hearts/rings based on: 1. Attach the suction cups with wire. If there are no holes, and the base has a styrofoam (hard foam) base, then you can attach the suction cups yourself in the corners: make a cross from short sticks or twigs, rewind them with wire, use an awl to pierce holes in the mold according to the width of the wire, thread the wire through the oasis foam, push a little so that the cross sinks into the foam, and attach a silicone suction cup to the bottom with wire. We lift the ends of the wire up and tape. 2. Additionally, attach ribbons or fishing lines to securely fix them on the machine.

9. Add decor if necessary. We glue everything well. Rattan or bergrass should be attached with suction cups to prevent it from being blown away by the wind. 10. Install: a) wipe the hood with a soft damp cloth (I always carry it with me in a ziplock bag) b) place it on the hood, press the suction cup from below and pull the levers in different directions. The suction cups should stick. c) open the hood and tie the ribbons at the front on the hook, pull them under the upper corners of the hood, and tie them together tightly. We cut off the excess tape so that it does not get pulled into the engine. d) check the reliability of adhesion.

3. Garlands on the hood

Among the garlands, several types can be distinguished, depending on their location: 1. V-shaped garland (stretch) + Option with decoration of the radiator grille.

2. Garland on the passenger side - option from the corner to the center of the hood - parallel to the hood wing

3. Garland diagonally across the entire hood (from the corner to the headlight). Sometimes the windshield on the passenger side is decorated with a garland. ! It is impossible in bad weather conditions, since the garland interferes with the operation of the windshield wipers (this point must be discussed with the customer, i.e. you make the full option, whether or not you attach it to the windshield on the day of installation depending on the weather!)

4. Garland near the windshield (attached to the mirrors and additional suction cups on the hood). Should not interfere with the work of the wipers!

Accessories for weaving a garland:

Source Author: Sveta Chernyavsky

Tags:

wedding floristry

Cited 2 times Liked by: 1 user

Source

How to make a decoration for a wedding car with your own hands?

Wedding decor can be easily done with your own hands, the main thing is a little patience and perseverance. One of the most popular decorations on a car is, of course, large wedding rings on the roof of the car .

Master class on how to make gold rings on a car

For the rings you will need: a corrugated pipe 2 meters long, polystyrene foam, bright gold ribbon, tape, glue, scissors.

Gold rings for a wedding car

1. The corrugated pipe must be cut into two parts and connected into a ring. Secure with tape.
2. Wrap the rings with ribbon: here you can show your imagination and use not only gold color.
3. The two finished rings must be glued together and wrapped with tape.
4. Next, take the foam: you need to attach the finished rings to it. The entire structure is assembled together - fixed with glue and additionally decorated with fabric, flowers and ribbons. For better grip, the corrugated pipe can be pierced with a knitting needle.

Making wedding rings for a car yourself

To do this you need to purchase the following materials:

• any flexible hose - 2 m. It can be purchased at the plumbing or auto parts department;
• artificial flowers;
• satin ribbon 4 cm wide and 60 cm long. This element can be replaced with gold foil;
• several ribbons of different colors for decorating flowers: golden and white 0.5 cm wide, emerald - 2 cm wide. White will need at least 6 m;
• piece of foam plastic 25x47 cm;
• a piece of fabric for draping foam plastic slightly larger than the last one;
• transparent tape;
• scissors;
• glue;
• knitting needle or thick needle;
• small bells – 2 pcs.

The first step is to cut the hose into two unequal parts. Create a ring from each, securing with tape.

If you purchased a corrugated pipe, you need to completely wrap it with wide tape to remove the relief.

The blanks are neatly decorated with gold foil or emerald ribbon. By the way, its color can be any depending on the theme and the chosen color scheme of the celebration.

Having pierced several holes in the foam with a knitting needle, we attach rings to it using white tape in several places. At the same time we fasten them together with the same decorative element.

To avoid scratches from flowers on the car roof, the foam plastic should be sheathed or pasted over with a piece of thick fabric.

The next step is to cut the white ribbon in half. We pass each part through one ring and tie it in the middle. This is done in order to secure the product to the roof of the car.

Artificial flowers are cut to the required length and stuck into foam. For better fastening, glue should be used.

The base can be draped with organza, tulle or tulle.

The last step is to tie small bells to the tops of the rings. They can be replaced with doves, small flowers or figurines of newlyweds.

This is how, having spent very little time and money, you can create an exclusive piece of jewelry, which will certainly be in a single copy.

Decoration of car handles in a wedding procession

Doors are usually decorated with boutonnieres , but you can decorate the handles with bows or ribbons. Bows can be made by analogy with large bows, only using a piece of fabric of the appropriate size.

Photos of decorations for the wedding procession

If the wedding is planned in the warm season, then you can use fresh flowers in the decor. But you need to keep in mind that such decorations are short-lived. Therefore, artificial flowers are also quite suitable for decoration.

A video on how to make a decoration for a car for a wedding with your own hands can be viewed at the link:

Car decoration

Let's dive a little into history and figure out where the tradition of decorating wedding floats came from.

We owe this tradition to Europe. It was there, for a long time, that “bride bows” existed. While accompanying the bride to the church, boys walked with her, whose sleeves were decorated with “bride bows.” It was believed that they were a guarantee of a happy marriage and drove away evil forces from the bride.

Later, young ladies stopped supporting this tradition, but the ribbons or “bows” themselves did not lose their meaning. They began to be tied to horses or carts, and later to cars.

Each country has its own custom, the eastern peoples tie a cake decorated with flowers to the hood of the car, which is specially baked for this day, the Greeks tie a loaf of bread decorated in a special way, and we plant baby dolls as a symbol of future motherhood.

Wedding car decoration is truly a magical sacrament. There are also many secrets and superstitions associated with it.

Our ancestors paid special attention to little things that today seem insignificant to us. For example: a doll sitting on a cart was bound to stay with the newlyweds for life, protecting and protecting the new family from evil, taking upon itself all the troubles and problems of the young family

There are many superstitions associated with this same doll:

1. It was believed that if the doll was stolen, the couple would not have children;
2. If a child shows interest in a doll at a wedding, then the sex of the unborn baby could be predicted.
3. The bride herself had to choose the doll for the bonnet.

In ancient times, a wedding was always considered a powerful energetic event. And it was lovebird dolls, according to legend, that absorbed all the positive spirit, which is why they were considered amulets. Lovebirds were most often made by bridesmaids from multi-colored scraps, and a splinter or sliver was taken as the basis. But not every kind of wood chip was suitable; it was strictly forbidden to use alder and aspen due to their close connection with evil spirits. Lovebirds also had one more feature - they should have one hand in common, as a sign that the spouses should go through life hand in hand.

Today this beautiful tradition has sunk into oblivion. Modern couples do not make dolls with their own hands, but are increasingly purchasing ready-made accessories.

But the eastern peoples, on the contrary, faithfully preserve traditions; to this day, they attach a cake to the hood of the car, baked in a special way and precisely for this day. The Greeks prefer the loaf, but for the Caucasian peoples, I consider the main symbol in decoration to be the carpet used to cover a car.

In the modern world, wedding teddy bears or bunnies are becoming very popular. They are placed on the hood or radiator grille. The space around is draped with fabric or decorated with fresh flowers. A classic example is usually a bear-groom in a black tailcoat with a bow tie, as well as a bear-bride with a veil and a wedding dress, as similar as possible to the dress of the bride herself.

Such bears are necessarily sewn together and after the wedding they are kept as a family heirloom.

The color and style of such decorations depends on your idea: if it is a dude style wedding, then the toys should certainly be bright, and if it is a classic wedding, then the toys should be decorated with lace, pearls and other cute decorations.

Or maybe you want to put cute little animals on the hood also because you have some pleasant memories, for example, do you like to call each other that?

How to beautifully decorate the car of guests at a wedding with your own hands?

Guests' cars are not given as much attention as the guests' cars, but this is not a reason to neglect their decoration. The main rules for decorating guest cars are style matching with the entire cortege and color combination. If contrasting decorations look great on black or white models, then for bright colors you need to choose the color scheme of the decor so that the decorations do not get lost against the bright background. For example, if a guest has a red car, then blue or yellow decorations will go with it.

Video of a master class on decorating a car for a wedding with your own hands:

As you understand, there are a lot of options for decorating a wedding car! The main thing is to decide on the details and start doing everything in advance.

Interesting examples

In order for the wedding to go well, you need to prepare everything in advance and think through every moment in its organization.

Decorating the car will be no less important detail than all other stages. To beautifully dress up the bride and groom's car, you need to know at least the basics of decorating vehicles for such events

Finding inspiration from various photos and websites, you can create your own, unique look for the wedding procession, which will remain in the memory of the newlyweds and all guests for many years to come.

The most preferred color for a wedding car is white, as it symbolizes purity, with which the new life of two lovers who decide to unite themselves in marriage should begin. The decor of such a car can be very diverse, but contrasting colors look best, for example, red and white, which complement all elements of the car.

It is important not to overdo it and use the right combination of red and white shades. An excellent addition in this case would be flowers, which may be different in appearance, but in one color scheme to match the entire design.

Tulle on the hood and handles, complemented by a bouquet and boutonnieres, will be a simple but very effective option for decorating the newlyweds’ car.

In addition to the traditional tulle and flowers, toys symbolizing the bride and groom can be installed on the roof, and additions to them can be installed on the hood. For example, if a hare and a hare with carrots are placed on top, then toy carrots can also be attached to the hood. This decoration will delight newlyweds with a good sense of humor and those who want to stand out from the crowd.

Of course, decorating a white car exclusively with flowers will look chic. The presence of a large bouquet, which will be located in front, on the radiator grille, and small boutonnieres of the same color, located along the hood, will become a modest, but very stylish decor. This option looks especially good on large and expensive cars, which in themselves are already the “highlight” of the event, and with a little addition they become the real center of the holiday.

You can also come up with a number of decorations for a black car that will look great, creating an amazing holiday for the young people and giving them a great mood. It is best to use light decor for dark vehicles. For example, white tulle looks amazing against a black background. You can decorate the salon doors in a very original way, for which tulle is stretched from top to bottom and tied in the center with a bow, decorated with a boutonniere of the same flowers as on the hood. The presence of contrasting shades creates an amazing effect, and a black car that would seem unsuitable for a wedding becomes surprisingly beautiful.

Adherents of a laconic style in decorating a car for a wedding will like the option that requires the presence of two hearts of a white or light shade, symbolizing the love of the bride and groom, flowers of a similar color scheme located inside the hearts, and a hat of the bride or groom if the cars are different. You can also use two accessories together.

If the newlyweds have a whole limousine at their disposal, then its decor should also be approached responsibly. Since the machine itself is very large, there is no point in overloading it with additional accessories. Typically, wedding cars of this size are white, so you can decorate them with flowers of darker shades. Red, pink and beige roses, complemented with green petals, will look very impressive. For a more stylish appearance, you should add satin ribbons to match the flowers.

Not everyone likes modesty, especially on the occasion of a wedding, so even a limousine is decorated on a grand scale. The presence of voluminous flowers in bright shades on a long white car can be complemented by a scattering of hearts glued to the hood and side of the car

When decorating like this, it is important to maintain consistency in the color palette so that the flowers and hearts are the same color, such as red, white or pink. Externally, the car will look too colorful, but not a single one of those who sees it will remain indifferent

You can decorate a wedding cortege in different ways - the decor will depend on many factors, but the most important thing will be the desire of the young couple to be together, to love and protect each other and to live happily ever after for many years.

An interesting idea for decorating a car for a wedding in the video below.

Car handle decorations for weddings

You can decorate the car handles with floral arrangements made of fresh or artificial flowers, attached with ribbons or ribbons. The composition will look very impressive if you attach ribbons fluttering as you go. Another option for decorating handles is bows with ribbons or balloons.

Photos of car handle decorations for a wedding procession