How to lace a wedding dress with a corset - lacing rules

At first glance, there are no secrets on how to lace a wedding dress. Then it turns out that this process has its own characteristics and nuances, because the lacing can start at the top and end with a bow at the waist, it can start at the bottom (and this is also not easy to handle), be located on top of the zipper and serve an almost decorative purpose.

The habit of lacing up sneakers or boots turns out to be so simple compared to the hassle of a wedding that fussing with weaving ribbons seems like a difficult job. This process just has its own rules.

Basic rules for lacing a wedding dress

• If you've never tried lacing a corseted dress before, start while the bride is still wearing it and then adjust the corset to fit.
• Lacing of a wedding dress starts from top to bottom.
• If there is a zipper, fasten it first, and then start lacing.
• When lacing a dress with an open back, make sure that the threads do not dig into the body: this will not only be unsightly, but also painful.
• A wedding dress should fit snugly around the waist (and only that!). Do not tighten the corset tightly on the chest, otherwise the bride will not be able to breathe.
• During the lacing process, ask the bride to support her breasts with her crossed arms from the inside - this will give the breasts a beautiful shape.
• Let us remind you once again about the size: if the corset is tightened completely, and at least one finger fits freely under the ribbons, the wedding dress is too large and will constantly slide down. There are 3 options here: constantly correct it, suture it or replace it with something else.

How to lace a removed wedding dress

This method is much simpler than lacing the bride right away. Therefore, if this is your first time encountering such a task, try this. It will be much easier to thread the ribbons through the loops on the removed outfit, and then just adjust it to fit your figure.

1. Hang your wedding dress at a level that is comfortable for you.
2. Start lacing loosely from top to bottom: thread the ribbon through the holes and leave a distance of about 10 cm between the edges, no need to tighten it tightly.
3. In the middle, at waist level, leave 2 free loops of 20 cm each.
4. Continue lacing down to the bottom.
5. Tie a small bow.
6. Put the dress on the bride.

7. Distribute the lacing over your figure using the loose loops so that it is as loose as possible on the chest and tightened at the waist.
8. Tie the ends of the ribbon into a beautiful bow.

How to properly lace a bride's wedding dress

For more experienced assistants, we recommend the second method of lacing a wedding dress. It's better to do it together.

1. Put the dress on the bride. To protect your makeup and hairstyle, you should do it through your legs.

2. If there is a zipper, fasten it. If the dress is too tight and the zipper cannot be fastened, first lace up the corset.
3. Ask the bride to straighten her shoulders, straighten her back, and place her hands on her hips.
4. Thread the ribbon through the top loops and start lacing down.
5. Continue until you reach the waistline. The ends of the tape should be approximately the same length.

6. Having reached the waist, the corset will have to be tightened as tightly as possible. Ask the bride to lift and support her breasts with her hands, otherwise they will press down and look flat.
7. When tightening the cord, make sure that the zipper is clearly in the middle of the back, and carefully tuck all excess fabric under the corset.
8. Check that the dress fits snugly on the bride, tighten the lacing into a knot and tie it in a beautiful bow.

Video on how to lace a wedding dress

I'm far from skinny, but I can still afford any style!

What does the bride do:

she simply ignores the features of her figure and buys what she likes.

Why is that bad? A full figure is not without attractiveness - it is only important to emphasize the advantages and, if possible, hide the disadvantages. However, brides “in the body” often tend to do exactly the opposite

For some reason, people buy open dresses that dig into the back and sides, showing off too full arms. Preference is given to curvy models with a corset - which makes the figure visually even heavier - and tight-fitting dresses that emphasize the belly and wide waist.

Dear plus size brides! You need to choose your wedding dress especially carefully. Don’t deceive yourself that “I’m fine as is.” You can look MUCH better!

The ideal style for you is an empire style (a dress cut off under the bust), closed, with sleeves at least to the elbow. This outfit perfectly hides your belly, and the sleeves create a beautiful silhouette.

• If you have a clearly defined waist (the difference between the waist and hip volumes is at least 30 cm), and the size is no larger than 52, A-line dresses with a corset are also suitable for you, and even a mermaid silhouette for those who are especially curvy.
• For your own good, avoid fluffy princess dresses. Even if you really like it, but the Empire style, in your opinion, completely sucks. Otherwise, there is a high risk that you will look much more massive than you actually are. An open back is also not your option.
• Massive details and draperies anywhere only make the figure heavier. The simpler the outfit, the more straight vertical lines it has, the better.

• Do you have big breasts and want to show them off? No need! This will only make your image vulgar. Choose closed corsets, without neckline or sheerness. The corset must be of high quality to give the breasts a beautiful shape and support its weight.
• Don't forget about shapewear - it will come in handy, it will remove excess folds and reduce volume.

Finally, some good advice for brides. If you want to buy an unusual wedding dress, or you have a non-standard figure and you are not sure that you can make the right choice, trust a professional. Residents of big cities have the opportunity to communicate with a stylist - take advantage of it. Yes, the consultation will cost money (not that much - in the amount of the wedding budget), but you will be confident in the correctness of your choice. In addition, the specialist will advise which accessories are best to choose and how to create a complete look.

Shine!

And may you be happy :)))

Save

What's the difficulty?

It would seem that what is so difficult about lacing a corset. And the loops are in place, and the ribbons fit freely into them. However, lacing that is too tight will cause a lot of inconvenience for the bride and can greatly spoil her unforgettable evening. Therefore, any bridesmaid who has chosen a corset dress should be aware of how to properly lace this beautiful item of clothing.

Incorrectly laced ribbons will cause the bride’s dress to slip off and she will spend the entire celebration tugging at it and putting it back in place. Not very good, right? However, if the corset is laced correctly, the bride's appearance will be perfect.

Emotions

People are a litmus test for the emotional development of a holiday. If in some shots guests are laughing, crying, jumping, getting excited - you need to take it! This means that it was funny or touching for them, and they will remember this moment, and when they see it in the film, their emotions will increase many times over, which means the director’s task is completed!

Conclusion: The most important thing in editing is to capture the atmosphere of the holiday and capture the character of the newlyweds. And, of course, show your creativity and create a small masterpiece! By the way, we at “YourKino” edit your dream films, call us, and the video about your wedding will become a small work of art

History of corset dresses

Modern girls have a modest idea of ​​what corset dresses were like in the distant past. The corset was invented back in ancient Greece, and it was a wide leather belt with long straps that tightly pulled the owner’s waist, adjusting her to the beauty standards of her era.

The corset acquired its modern appearance only in the 17th century, when metal rods were replaced by whalebone. The trendsetter of French fashion, Catherine de' Medici, set a standard throughout the country: a woman's waist circumference should not exceed 33 cm. It covered not only the waist, but part of the hips and chest.

A later form of this item of clothing was separated from the bra, but was still inconvenient for modern and sporty girls. The war was just around the corner, and after that corsets were replaced by mobile shapewear.

It is worth saying thanks to the retro fashion, which one fine day returned this wonderful element of clothing to wedding fashion. Corsets of the 21st century rather serve as a decorative element. But especially strong ones can tighten a girl’s waist to those very Medicheval 33 centimeters.

Taking measurements and creating a pattern

Once the craftswoman has decided on the type of corset, she can begin creating the pattern. First of all, take measurements so that the product fits perfectly:

• chest girth;
• hip girth;
• waist circumference;
• from the point under the chest to the waist;
• from the waistline to the bottom along the side seam;
• from the waistline to the bottom along the stomach.

Modeling and sewing a corset can be carried out using two different methods of creating a pattern - calculated and dummy. The latter is usually called the tattooing method. The calculation consists of taking measurements and creating an individual pattern. The second is simpler - the fabric is pinned according to the figure (or a mannequin placed in place is used). For the fake method, follow the instructions:

1. The cords are tied on the mannequin in three places (chest, waist and abdomen). Use a cutting marker to draw them out and remove them.
2. Also, using a disappearing marker, draw lines, seams, mark relief parts, and the location of the bones.
3. Wrap part of the mannequin with cellophane film and trace the details with a pen. The finished elements are obtained by adding only seam allowance.

The construction of a slimming corset is not much different from a decorative one. Difficulties arise when modeling unusual original products. In this case, the master class will not help; professional courses will be required. Modeling technology comes down to simple steps:

1. The pattern is transferred to a rectangular grid and adjustments are made. After this, a pattern is made. If the model is made for a girl, then the waist line is made less pronounced.
2. Transfer the pattern to the fabric, marking all the details and numbering them. They check the accuracy, add seam allowance, and cut it out.

The technology of sewing a corset is carried out according to a template. After going through all the steps, you will get a “naked” standard model. It can be decorated or left as is.

Types of corsets

• With a zipper over which a cord is placed. It is threaded into special loops;
• Without a zipper, with loops and a fabric liner, thanks to which you can increase the size of the corset by 1-2 sizes;
• With large loops into which wide ribbons are threaded;
• Low waist;
• Classic long;
• Lace with beautiful lacing;
• With tightening.

Every bride needs to know that in the lacing process not only silk laces are used, but also strips of satin, as well as ribbons with high density and small thickness, for strength and convenience.

Usually, how to properly lace a corset is suggested when purchasing the dress itself, because many fashion designers try to put their own twist even into this insignificant element. However, if this did not happen, or you simply forgot, our advice will help you in this simple matter.

Shoes

Another point is shoes. She uses lacing not only in a purely practical way, but also as a complement to zippers or buttons. And, unlike other clothes, this element of decor very rarely adds romanticism, except perhaps in light sandals or high-heeled shoes. Brutality, strength, conciseness, beauty, sexuality, comfort, tight fit of the leg - the presence of laces helps to reveal a wide variety of qualities for every taste.

Lace-up shoes are stylish, fashionable and practical. It makes an impression and almost all of the most comfortable models are equipped with a volume and fit regulator in the form of lacing.

Gladiators, ankle boots, boots, shoes, sandals, sandals, sneakers - all have lace-up models in their lineup.

Such shoes can play either a major or a secondary role in the image, and be combined with other laced elements in clothing, but subject to the same or similar finish.

Important Tips

The first thing that should be taken into account at the time of purchase is the size of the dress. If it is too small, the bride will feel cramped and uncomfortable.

That is why you should choose dresses with a corset, the edges of which should be 5 centimeters closer to each other when trying on.

In order to put on such an outfit, you will definitely need the help of at least one person. Therefore, think in advance about who will help you get dressed on the morning of your wedding day and practice together in advance so as not to waste unnecessary time at the crucial moment.

The corset must fit snugly to the bride's body; do not allow too much freedom - the dress will dangle unattractively.

Lacing always starts from top to bottom. If the ribbons are too long, they can be cut or hidden in the folds of the corset.

You only need to tighten the corset tightly at the waist. In other places, this should be done moderately so that it does not make breathing difficult.

In order for the breasts to look good in a corset dress, during lacing, the bride should lift and hold them with her hands through the neckline.

If the style involves an open back under the lacing, do not forget to monitor the tension of the ribbons. They should not dig into the girl’s skin too much, as this not only looks unsightly, but can also cause pain.

Pregnant brides are strongly advised to avoid this style as it will have an adverse effect on the baby. There are other models that can highlight the beauty of a girl without such sacrifices.

Fabric Features

Satin has long been a material that is effectively used to create wedding dresses. It is mainly a silk fabric with a smooth surface and dense texture, which has the following advantages:

• perfectly emphasizes the figure;
• gives its owner a special charm, sexuality, charm;
• looks impressive in the photo;
• the best option for any time of year;
• pleasant contact of the material with the skin, does not create negative sensations, does not cause allergies or irritations;
• affordable price.

When purchasing a satin wedding dress, you need to consider the following points:

the material is dense and wrinkles easily, so it requires care both in wearing and storing until the wedding day

The wedding salon Rassvet Wedding offers free dress storage until the ceremony, as well as steaming and ironing if necessary. the shine that the fabric has can visually enlarge the figure, so girls with curvy figures need to approach the choice of a satin wedding dress with caution. But for girls who lack volume in the chest and hips, this effect will come in handy; it will make the image more seductive.

Step by step instructions

So, let's start the process:

1. If the style of the dress requires a petticoat, then it is put on first.
2. Then the bride puts on the dress itself, as the corset is laced directly on her.
3. Lacing starts from top to bottom. The ribbon is threaded into the loops, then the ends are applied to each other so that they are not of different lengths, and then laced further crosswise. It is important to ensure that the tape does not twist, otherwise you will have to start over.
4. We tighten the tape. To do this, you need to take it by the ends and pull it down in the places where it intersects.
5. The tightening process will have to be repeated several times throughout the lacing of the corset. At this time, the bride must support her breasts with her hands, otherwise the corset will compress it and the girl will have difficulty breathing, and the seductive bust will disappear. The waist area is tightened tightly, while the chest is looser to make breathing easier.
6. After tightening the corset, you should get rid of excess fabric using drawstrings or special zippers, and if there are none, then apply the finishing touches: straighten the ribbon and tie a beautiful bow.
7. Remember that the lacing should be located exactly in the center of the back, only then will you achieve the perfect look and avoid a ridiculous look.

By following these simple tips, any girl will not only be able to manage such a complex process, but will also subsequently be able to help her friends and other brides in creating a beautiful image.

Lacing steps

For any type of corset, the lacing technique will be similar. The process includes the following steps.

Bride putting on a dress

If, at the time of fitting in the salon, the girl first puts on shoes and a petticoat, then on the day of the celebration, when the hairstyle is already ready, they begin by putting on the dress through the legs, and then the petticoat is put on. Next, if there is a zipper on the corset, you need to fasten it. However, if the halves of the zipper come together end to end, you should first tighten the lacing and only then fasten the zipper.

Threading a lace or ribbon into a corset

First you need to thread the top loops and tighten the cord so that the ends are equal in length. So we move down and thread all the holes or loops.

Tightening the corset

• Holding the ends of the cord (this will prevent them from slipping out of the loops) with one hand, gradually pull the lacing down with the other hand at the crossing points. It is more convenient to do this manipulation together - let one girlfriend hold the ends of the cord, while the other drags it down in turn with both hands. If you have to tighten the corset alone, hold the ends of the lace comfortably with your left hand, and with two fingers (index and thumb) of your right hand you should pull the lace at the intersection points, and then pull them down with the middle finger of your right hand.
• Grasping the next intersection with two fingers, you need to pull it up, while simultaneously releasing the middle finger at the previous intersection of the cords. If tape is used to tighten the corset, it will not slip out, so there is no need to hold it by the ends.
• Gradually pull the ribbon down through the loops while straightening it.
• The bride should support her breasts with both hands while tightening the corset so that they don’t end up looking too flat. At the same time, you need to hide the excess fabric. In corsets without a zipper, you need to carefully straighten the fabric liner. When the corset has a zipper, tuck the excess fabric under the bones to the sides so that the zipper is right in the middle of the back.

Tying a lace or ribbon

Make sure the dress fits snugly around your waist. Tie the ends of the lace into a bow, and if they are very long, trim the excess with scissors. At the same time, it is worth leaving a little in reserve in case of re-lacing the dress.

The ends of a regular lace will not fray or unravel, but if an unusual cord is used, its ends can be treated with clear varnish. If the corset does not have a zipper, then you can hide the ends of the lace in the folds.

• We recommend that you practice lacing your wedding dress in advance, so that on the day of the celebration these manipulations will already be familiar to your bridesmaids.
• If the bride’s waist cannot be tightened too much (for example, she is pregnant), then the top of the corset is first tightened, thanks to which the breasts are fixed. Next, you need to tie a knot on the cord and lace the bottom of the corset a little looser.
• If lacing your dress yourself doesn’t work, go to any wedding salon, where they will show you how to do everything correctly.

You can see the process of lacing the corset in the following video.

Three ways to lace a wedding dress: video, photo and process diagram

To look perfect, maintain a royal posture all day, highlight her advantages and hide her flaws, the bride needs to choose a dress with a corset, which will become an indispensable assistant for her. We will tell you how to lace a wedding dress correctly and what to consider when choosing it.

Correct lacing of a dress is one of the keys to a successful wedding, because if it is not done correctly, then at best the bride will feel uncomfortable all day, and at worst it can lead to suffocation or disruption of the cardiovascular system.

Too large a “support group” at the fitting

A wedding dress is undoubtedly the most important dress in your life, and choosing it is a responsible matter. But you shouldn’t involve too many people in the selection process: when ten people vying with each other to tell you that this dress is beautiful or, on the contrary, that it doesn’t suit you, and even worse - opinions will be divided, rest assured - you will be confused and just want to take off this dress and quickly leave the salon

The optimal number of companions when trying on dresses is two. Ideally, these people will be your mother and sister or best friend.

Shouts and sighs of admiration can confuse you and lead you away from your own preferences. Of course, an outside perspective is important, and that is why it is better to take one or two people who are closest to you for fitting. They will be objective and put your interests first.

2

Types of belts

1. Transparent corset. This type of corset will suit the most daring brides with an excellent figure. It is considered very relaxed, because under it expressive underwear is worn, which shines through the translucent fabric. We recommend combining such a corset with a long floor-length skirt that completely covers the bride’s legs.
2. Low-cut corset. This option emphasizes the advantages of the figure and completes the image. If such an accessory is embroidered with stones, pearls or rhinestones, it will highlight the waist well. A lace corset, or a corset with a bright element, can visually enlarge the bust. Gloves and a lace veil go well with such corsets.

Some brides think that a wedding dress with a corset must be voluminous, because it looks more luxurious this way. However, sophisticated godet styles, fishtail, A-line and short dresses with trains can also work well with a small corset to match.

Attention! When choosing a dress with a corset, it is important to choose the right size, otherwise you won’t be able to lace it well -

lacing can tighten the chest, or, conversely, there will be a lot of free space left.

Based on lacing, wedding dress corsets are divided into three main types:

1. With loops through which lacing is threaded . Typically, these models have a zipper with a clasp or buttons.
2. With holes into which lacing is also threaded , however, there is no zipper, but there is a layer of fabric that allows you to increase the product by a couple of sizes.
3. With large loops - a large satin ribbon is threaded through them , which holds the entire outfit well. However, this option may not be suitable for those with curvy figures.

Dress finishing options

Brides should not overload their dresses with rhinestones and other decor. Models with decorations can be simple

It's best to make one detail important. For example, a corset decorated with beads

To decorate the bust, you can scatter shining decor across the bodice. Or give them a high slit on their wedding dress, thanks to which the visual height of the bride will noticeably increase

When choosing a dress, you need to pay attention to every little detail.

Sleeve decor is a special topic in wedding fashion. They are decorated in whole or in part. Choose a pattern or stick to abstraction

Cuffs with iridescent stones, beads or pearls will distract attention from too full breasts

Lush dresses with the entire hem decorated with stones of different sizes look luxurious for a wedding. From below - larger, and as you approach the hips - smaller.

Rhinestones

With the help of rhinestones, you can successfully emphasize the model of a wedding dress, focusing on the decor. For example, decorate the neckline or slit in the skirt asymmetrically. A floral pattern on a wedding dress with rhinestones is considered an acceptable option.

You can decorate the decoration with a butterfly, lined or made of rhinestones, a bow, a flower, or even a heart. The outfit, which is completely strewn, like dew, with small shimmering stones, looks especially luxurious and rich.

The decor of the corset will not only allow you to concentrate attention on the bride’s graceful waist, but will also emphasize the cut of the dress. A separate belt can be made from rhinestones, in harmony with the same wide bracelet or neck decoration

Rhinestones look special with different fabrics.

These elements, depending on the cut and size, can be very bright or, conversely, barely noticeable. Small ones will create a mesmerizing shimmer effect.

If you plan to decorate the entire skirt with rhinestones, it is better to do this on a narrow outfit. Fluffy wedding dresses with rhinestones can make a girl’s hips or short stature look bad

Drawing attention to imperfect areas of the body with decorations is undesirable. You can distract attention from wide hips by decorating the neckline or sleeves with rhinestones

Decorative materials on the hem of a dress or corset will help hide imperfect breasts.

Belt. For a slender bride, a belt decorated or made entirely of rhinestones is suitable. The material for making such a belt can be any - silk, satin, lace. The size of the belt directly depends on the girl’s physique.

A tall and thin bride can try on a wide belt embroidered with large rhinestones. A belt can be a contrasting element of a wedding dress

Choose a scarlet or blue accessory for your white decoration, the crystals on which will shimmer and attract everyone’s attention. Shoes, bouquet and decorations are selected to match this element.

• Bodice. To decorate the bodice or neckline with rhinestones, it is better to choose a special mesh for this purpose that will hold its shape. The material for the top of the dress should not be matte, but iridescent - silk, organza, satin.
• Hem. You can effectively decorate the hem not only by asymmetrically scattering crystals over it. Leading fashion designers suggest creating entire compositions of flowers or intricate patterns on the skirt. They will look great on full, two-tier skirts or on A-line dresses. In this case, rhinestones can be combined with embroidery and lace.

Stones

In the old days, noble ladies chose wedding dresses with stones. But today we understand that such a wedding dress will have considerable weight and any bride will not want to carry kilograms of stones all day.

Decorative stones are an excellent substitute for gems. Their cut and brilliance are in no way inferior to diamonds and pearls. Decorative stones are conventionally divided into crystals and glass. Glass transmits and refracts light, like diamonds, and creates a shimmering effect. With crystals on the decoration belt, you can achieve shine, a shimmering effect and an unusual shine.

Decorative stones are successfully combined with guipure, lace, openwork inserts and embroidery. Lace models with stones always remain in trend.

You can decorate a long train of a dress, a two-tier hem or a bodice with stones. Their shimmer on the wedding dress will add shine and give a special shine to the eyes.

Beads

Bead embroidery of wedding dresses is most suitable for creating a subtle symmetrical ornament or a complex intricate pattern. Beading is used on the bodice, corset, belt, hem. Thick scatterings of beads create a unique radiance with every step of the bride.

With the help of beads you can even imitate various fabrics. For example, they use it to embroider decorations in entire stripes, creating a brocade effect. Bead patterns can be in the form of small rings, imitating the effect of polka dot fabric.

Methods

Let's take a closer look at several methods showing how to properly lace a corset on a wedding dress.

First

1. The bride holds her hands on her waist, fixing the corset.
2. We thread the lace through the top right and left loops.
3. Align both ends of the lace.
4. We begin lacing as usual for lacing sneakers: we thread the left side of the lace into the right loop, and the right side of the lace into the left. We continue until the end.
5. We tie a neat bow at the bottom.

Learn more about how to lace a wedding dress in the video:

Second

How to properly lace a corset with a satin ribbon - see the instructions below:

1. The girl puts on a dress. If the bride already has her hair and makeup ready, we recommend wearing the outfit underneath.
2. We thread the ribbon into the two upper loops, aligning both ends so that they are the same length.
3. We pass the left end of the ribbon into the second loop from the top on the right side. We carefully ensure that the ribbons do not twist, otherwise it will not look very aesthetically pleasing.
4. We pass the ribbon through one loop from the left side to the right.
5. We continue to thread one side of the ribbon through one loop until the ribbon runs out.
6. Now we pass the right end of the ribbon into the left loop from above and pass it through the ribbon along the right side.
7. When there is not enough lacing, we adjust the back and begin to tighten the ribbons on both sides so that the ends of the ribbon become longer.
8. We continue lacing.
9. After finishing the work, tie a bow and remove the remaining ribbon inside the dress.

When the lacing of the wedding dress with a satin ribbon is ready, you need to adjust the back of the dress so that it is even under the lacing and does not cause inconvenience to the bride.

Learn more about how to lace a corset on a wedding dress in the video:

Third

Wedding corsets for pregnant women have their own nuances. We tell you how to properly lace a corset for a pregnant bride

1. We lace the top of the outfit using any of the methods presented above.
2. We tuck the excess fabric in different directions under the bones of the corset.
3. We ask the bride to lift her chest with both hands.
4. We tie the cord in a knot or bow to effectively secure the chest.
5. We continue lacing the lower part of the outfit looser.

Photo and process diagram:

We advise girls in the last months of pregnancy to completely avoid wedding dress models with a corset - primarily because this can harm your health and the health of your baby. Instead of a model with a corset, you can choose a Greek-style outfit that emphasizes the arms and chest, dresses with a high waist or without an emphasis on it.

Interesting! Check out interesting wedding dress options. The fishtail style is very popular.

Wrong size

Many brides are planning to lose weight before the wedding and want to buy a dress a size smaller so that there is an additional incentive to lose weight. This decision is fundamentally wrong!

Let's face it: what if you don't lose weight as you planned?

6

Bride

Whatever the model of your wedding corset, almost any lacing technique will suit it. Marina Podgornaya

If previously such outfits were bulky and terribly uncomfortable, now they are made of soft materials and do not take up much space in the closet. A dress can have two types of corset: the upper one, which is put on over the head, and the lower one, which is under several layers of fabric. Most often, a classic wedding ball gown is sewn with a corset; corsets are less common in other models.

Interesting!

Problems that may arise

An incorrectly laced wedding dress will always slide down during the celebration. But it’s not just poor corset lacing that can become a problem. The bride may face difficulties if she bought an outfit that is not her size. To avoid purchasing an outfit that is too wide, when purchasing the corset, you need to tighten it as much as possible and try to insert your finger under the lacing. If your finger fits through, it means the dress is too big for you.

If you find that the dress is too wide after purchase, be sure to sew the outfit. If you can’t change the corset, add straps to the dress.

Underwear

What about swimsuits? Knitted swimsuits with many lacing options have been holding first place in summer beach fashion for several years.