How to decorate champagne for a wedding with satin ribbons with your own hands: master class, bride and groom

Another master class on how to decorate champagne for a wedding with your own hands. Bottles decorated with ribbons - “Bride and Groom”. The master class was prepared for you by Alena Glazkova.

A wedding is a significant event in the life of young people. They want to capture the day of celebration in their memory. According to custom, bottles of champagne are left for the bride and groom until their first year of marriage. Of course, you want the bottles to stand for a reason, but to be designed in an original way. I offer you an accessible master class in which you can easily decorate champagne bottles with your own hands. The materials that will be needed for decoration can be purchased at sewing and handicraft stores.

The design of the bottles can be combined with the outfits of the bride and groom, while maintaining the same color scheme and model.

Materials for production:

satin ribbon 4 cm wide, white,
satin ribbon 0.6 cm wide, white,
dark blue bias tape,
scissors,
metal ruler,
simple pencil,
glue “Moment Crystal”,
white guipure fabric,
white stretch guipure,
white half beads,
glue rhinestones,
two bottles of champagne.

Wedding decoration with champagne “Bride and Groom” - master class

Let's start decorating the wedding champagne.
Let's start with the groom. Let's tie a beautiful tie for the groom, but before that we need to make the shirt collar. Take a white satin ribbon 2 cm or more wide. We bend it in half lengthwise and iron it. We measure how much ribbon is needed to braid the neck

Please note that we are already beginning the process of braiding the bottle with ribbons, so place the ribbon at the back a little higher than at the front. You will understand how it should be done correctly, since the tape should lie perfectly flat and fit tightly. Burn the edges of the tape with a match or lighter

Apply glue to the surface of the bottle and glue one end first, then the other

We burn the edges of the tape with a match or lighter. Apply glue to the surface of the bottle and glue one end first, then the other

It is important that the upper corners of the collar touch and do not intertwine

Next, we raise the collar (just like in a shirt), take a white ribbon of the same thickness and weave it around the bottle close to the fold, repeating exactly the slope of the collar. First we glue one end, then we glue the second overlapping. Next, each layer of tape must be overlapped with the previous one by 1-2 mm upward.

We glue another tape. The collar and shirt are finished.

Let's tie a fashionable tie with an "Eldridge knot" from a blue ribbon, which we will braid around the entire bottle. Below is a detailed diagram of tying such a knot. You may not like it and you can tie a different type. The only advice: the end of the ribbon in the right hand should be long (about 30 cm) so that it is convenient to weave, and the end in the left hand will remain unchanged (it will make up the tie).

We put the tie on close to the fold of the collar and tighten it.

We lower the collar down and glue the end of the tie to the bottle.

Next, we begin to braid the bottle with a blue ribbon (width 1.3 cm or at your discretion).

We braid this until the shape of the bottle begins to change dramatically and we have to glue several rows of tape in one place.

When the smooth surface of the bottle begins, glue the end of the tape in front in the center. The tape should be level and overlap slightly, where the oblique rows end on the reverse side.

We wrap the bottle very tightly with tape, securing each row at the front with a small drop of hot-melt glue.

We cut the ribbon and fasten it in the front in the middle. We cover the cut with beads and decorate them further, imitating buttons. Glue on the boutonniere and the groom is ready!

Take a white ribbon of the same width as for the groom's suit. You need to start braiding the bride from the level where the groom's blue ribbon (jacket) begins. First, in the back center, you need to secure a bottle-length tape with the front side to the surface using hot glue. It will cover the joints. We braid the bride in the same way as the groom, only part of the shirt and tie is missing.

The only difference is that when the flat surface of the bottle begins, we fasten the edge of the tape in the middle at the back and fasten the end there too. Everything ahead must be perfect.

The base of the dress is done. Now we will wrap the flat part with lace. The joint should also be at the back. Apply glue to the joint and a couple of drops on top so that the lace does not slip.

Let's prepare a bow for the top of the dress. For it you will need a blue ribbon 2.5 cm wide, a ribbon 0.7 cm wide. Place the blue ribbon in the center, and cut two pieces of the white one and place it along the edges of the blue one. We tie a bow with a white ribbon into two knots, hide them at the back, and cut off the ends.

Apply glue to the knots and glue the bow in the front center above the lace. First, we braid the bottle with blue tape on one side and the other, sealing it at the back at the junction, and then with white tape, slightly covering the edges with blue. The basic rule: the ribbon should lie flat and cover the edge of the lace. Hot melt glue can be applied pointwise when we braid it with tape.

We lower the tape at the back and glue it, covering all the joints. Glue the end of the tape to the bottom of the bottle and decorate it with beads.

We glue a regular bow from a thinner white ribbon on the front and decorate it further with beads (at your discretion).

The bride's dress is ready!

Now you know how to decorate wedding champagne with your own hands. You can decorate glasses in the same colors. We will tie a regular bow from white organza (2 cm or more wide) and the blue ribbon from which the groom’s suit was woven. First we tie it with a white thin ribbon, placing the knots on the back side. The ends should be the same - we will use them to tie the bow to the leg.

Then we tie it in the same place with a blue ribbon, but we cut off the ends end to end. Glue a bead in the middle.

We tie it to the leg with a white ribbon, tying a knot in the front. Leave the ends free. We burn the ends of all the ribbons.

Wedding champagne in the shape of the bride and groom is ready to decorate the festive table!

Let's start decorating the bottles

1. Place the bottles in water for a while to remove the labels. We degrease it by wiping the glass with alcohol and wiping it dry.

2. Bias tape is a ribbon already cut on the bias; when decorating, it easily fits on any curves, unlike a simple satin ribbon. Sold in cutting and sewing stores. We take white tape and glue one end of it at the neck. We wrap it around the neck of the bottle, cut it to the required length and glue it with an overlap (look at the photo). Using this principle, we cover the entire bottle. We cut off the trim only after trying it on the bottle.

When you reach the widest part of the bottle, do not cut off the trim - just glue it on, wrapping it in a circle.

We glue everything with glue - a gun, or use “Moment Crystal”.

It is important! Apply it only to the edge of the binding - not to the middle, as wet spots of glue will show through.

Master class: bride and groom made from champagne bottles

The bride and groom made of satin ribbons on champagne bottles is a common attribute of a wedding celebration. Previously, this craft was ordered from decorators, but now anyone with minimal handicraft skills can make such a decoration.

You can decorate champagne in the form of newlyweds using different techniques: entwining bottles with ribbons in the simplest way or using the more complex kanzashi technique.

Champagne wedding couple decorated with ribbons

Groom made of ribbons on a bottle of champagne

To make a groom, you need to prepare materials:

white and blue ribbons;
white half beads of different sizes;
heat gun;
lace;
organza;
small artificial flower;
champagne

Step by step execution:

Cut a white satin ribbon 2 cm wide so that it is enough to wrap the neck of the drink. Fold along and carefully iron the fold line. Lightly scorch the edges with fire. Apply adhesives to the bottle and glue the tape, first one edge, then the other

Please note that on the back side the tape should be positioned slightly higher than on the front side so that it fits tightly to the surface of the glass. Raise the ribbon along the fold, like raising a collar, before putting on the tie. Glue the same white piece from below, close to the fold line of the first tape.

Bride made of satin ribbons on a wedding bottle

You need to make a bottle with ribbons in the shape of a bride from the same materials that were used to make the groom’s craft.

The bottle of champagne representing the bride may be a little shorter, then the couple will look very beautiful and gentle

Step by step execution:

Wrap a white ribbon around the bottle from the level where the “groom’s” jacket begins (made of blue ribbon). The technique is the same as when making a shirt.
Then wrap the bottle crosswise with the same ribbon, overlapping the ribbon slightly, going down to the very bottom.
Wrap the flat part of the bottle with lace, the edges should meet on the back side.
Make a bow from satin ribbons. How to tie a ribbon: prepare a blue or white ribbon (2.5 cm wide) and a white ribbon (0.7 mm wide). Glue the blue ribbon in the center of the bottle above the lace. Wrap a thin white ribbon on top and tie a bow with 2 knots. Trim the ends.
On the reverse side, cover the joints with white tape.
The front part can be randomly decorated with beads or seed beads.

Decoration of the bride and groom with ribbons in classic colors

You can decorate champagne with your own hands in an original and simple way and observe the traditions of the holiday. You just need to use your imagination a little and have some free time. You can also decorate the newlyweds’ glasses in the same style - you’ll get a beautiful set that also acts as an additional wedding decor.

To make everything clearer, watch the video of making clothes for champagne for a wedding with your own hands from ribbons:

We decorate wedding glasses and other attributes

Decorating a wedding table is not limited to decorating bottles with your own hands with ribbons. Most often, they are decorated in the same way with other decor - boutonnieres, candles, etc.

It is better to buy glasses separately rather than take them from a set. Most often, they are stored for many years as a memory of the wedding, without washing away the decoration. Next, we decorate the glasses, like the bottles, with satin ribbons with our own hands so that they form a single set. Decorative elements may differ, but it is worth tying bows from the same ribbon that is woven around the champagne on the stem of the glass. Next, the small decor is attached with transparent glue.

In addition to wedding bottle decor with satin ribbons, we offer a master class on making a basket (based on soap and pins).

See alsoFlowers in the interior. Photos and recommendations

How to decorate bottles with your own hands?

Bottles of wine, decorated by hand, should fit into the overall tone of the holiday and its style. There are simply an incredible number of options for decorating a drink; choose the one you like and follow the instructions step by step. For those who have a penchant for handicrafts, a great option is to decorate a bottle with polymer clay. Minimum costs and your masterpiece will delight all guests!

You will need:

a couple of bottles of sparkling wine;
white spray paint;
ready-made polymer flowers;
glass pencil;
rhinestones, beads for decoration;
glue, ribbons, lace, scissors.

The work itself will not take much effort and time. First, paint the bottles with white spray paint, then draw the outline of the desired decor option. Place polymer flowers, beads, ribbons, rhinestones, bows along the finished contour and secure them with glue. This type of champagne decoration is very simple, and the effect is amazing.

An equally interesting, but much rarer option is decorating champagne with photographs of a married couple. Photos can be placed on bottles instead of labels. In a similar way, you can decorate the bottle with a sticker with the date of the celebration or wedding, with the names of the bride and groom. Decorating with photographs is a simple process. First, print the necessary photographs on thin paper, and then apply them to the bottles using the decoupage technique. The contours and the rest of the bottle can be decorated with ribbons and rhinestones.

You can contact your nearest photo studio, where they will help you select special wedding pictures and logos and print them on paper of the required format and quality. Champagne with images of newlyweds in reality look magical and intriguing. Be sure to consider this option for decorating the drink and you definitely won’t go wrong.

Champagne looks rich and elegant in bottles decorated with gold or silver. In this design, the drink can retain its original appearance for many years. The choice of patterns and inscriptions suitable for decoration, of course, is a purely personal matter, but it is better to entrust this kind of work itself to professionals who know a lot about this matter.

You can create another champagne decoration option on your own - decorating bottles with satin ribbons. To work you will need:

bias tape;
glue;
rhinestones, beads, feathers for additional decor;
two bottles of champagne.

The point of the process is to attach pieces of bias tape to the bottle according to the pattern. The pattern depends on the selected pattern. These can be bottles in the suit of the bride and groom, vest bottles for a wedding in a nautical style, etc.

It is better to start designing from the neck of the bottle. The top can be decorated with a black hat or mustache, or a veil. Add beads and rhinestones as desired. Do not cut the ribbon into pieces at once, as the length will change as you work, depending on the shape of the drink bottle.

As you move from top to bottom, the edges of the attached tape are hidden under the top edge of the next row. The widest bottom part of the bottle is also decorated with ribbons, but the tails are secured from the bottom. It is not at all necessary to attach the tapes at an angle, it all depends on your imagination. If somewhere you get a sloppy stripe or the ribbon is crooked, you can fix everything by attaching a decorative element over the satin. This decor option looks good with the addition of feathers of different colors and sizes.

As you can see, there are really many options for decorating champagne. This is only a small part of what you can do with your own hands. It’s up to you to decide – use ready-made ideas and master classes or come up with your own unique design.

Materials and tools

To work with tapes, you will need a set of simple tools that can be found in every home. If this is your first experience in decorating bottles, then it is better to start with simple design solutions to get the hang of it. To work you will need:

Sharp scissors.
Glue that adheres well to glass. It's better to use "Moment".
Braid, lace, scraps of fabric.
Accessories: beads, beads, buttons, cabochons.
Tweezers for creating miniature elements.
Ribbons.

The basic material also has a number of variations:

Satin. Most commonly used due to its pliability and elegant aesthetic appearance.
Silk. Thinner and more slippery material.
Satin. They have a denser structure, and the fiber pattern is visible to the naked eye.
Jacquard. Decorated with original drawings.
Organza ribbons. The material is translucent and airy.
Cotton. They hold their shape well, so they are suitable for creating three-dimensional compositions.

Each of the above types is used by needlewomen to decorate bottles, but the most popular material is satin. It combines the optimal ratio of quality and price.

Complex compositions made from combined materials look original. For example, cotton flowers surrounded by satin petals or the same background.

Decoration with photographs and engraving

Decorating a bottle of champagne with photographs of the bride and groom has long been used by newlyweds. To do this, the photo laboratory orders photographs of the newlyweds of a certain size in heart-shaped frames, equipped with original wedding drawings. These images are applied to special adhesive paper, which is then easily pasted onto the bottle.

Engraving a wedding bottle is a rather rare and expensive way of decoration, but it allows you to make the bottle original and memorable. The creation of drawings and inscriptions is entrusted to specialist engravers, who, at your request, apply all the necessary symbols to the bottle.

Wedding bottle decoration is an interesting creative process that gives you the opportunity to show your imagination and talent as a decorator. By putting your soul into this activity, you can get a magical result that will be remembered by all the guests of your celebration and will make the ceremony and subsequent banquet original. You will remember the wonderful moments of your wedding for a long time and will be proud that you approached its preparation seriously and responsibly, without missing a single small detail.

Popular articles Congratulations on Palm Sunday

Variety of techniques

There are a lot of different techniques and styles for decorating wedding bottles; here are some original examples.

in decoupage style;

Jewelry made from polymer clay looks very delicate;

decoration with fresh flowers;

in various traditional folk costumes, for example, in the Ukrainian style;

those who know how to crochet can knit charming outfits;
one of the popular techniques for decorating champagne from ribbons. The execution of this technique is very simple, and the result is elegant and beautiful.

Wedding champagne bottle: trim with ribbons

Using satin ribbons is a simple and optimal budget option. This method of decoration is characterized by fairly simple steps and helps to create a bright and unique decoration for the holiday table.

There are many interesting wedding traditions, including two untouched bottles of sparkling drink.

ribbons of several shades;
glue;
scissors;
lace;
elements of additional decor (flowers, rhinestones, beads).

Attention! Bottles must be thoroughly cleaned of contaminants - dust, greasy marks, stains. Pasting begins from the neck where the foil ends

The required piece of tape is glued to the bottle, the excess is cut off. The second layer is glued slightly overlapping the first. This way you can make 3-4 layers. It is recommended to use a white ribbon, then you will get an imitation of the groom's shirt. For subsequent decoration, it is better to take a ribbon of a different shade - black, blue, gold. The entire surface is covered in a similar way. You can place a piece of ribbon in the center to act as a tie. The bottle for the groom is ready. Lace is useful as an additional decor

Pasting begins from the neck where the foil ends. The required piece of tape is glued to the bottle, the excess is cut off. The second layer is glued slightly overlapping the first. This way you can make 3-4 layers. It is recommended to use a white ribbon, then you will get an imitation of the groom's shirt. For subsequent decoration, it is better to take a ribbon of a different shade - black, blue, gold. The entire surface is covered in a similar way. You can place a piece of ribbon in the center to act as a tie. The bottle for the groom is ready. Lace is useful as an additional decor.

Just to the left of the neck there is a small flower made of white ribbon - a boutonniere.

The bottle for the bride is made of white ribbons. The registration process is carried out according to the steps described above. The lid is covered with a small piece of lace, which is a veil. In the belt area you can add a bow or ribbon flowers. Decorate the neck itself with beads or rhinestones.

Bottle preparation

Both empty and full containers must be properly prepared for the procedure. First, remove the label and any remaining glue along with it. There are two methods for performing this procedure:

Soak the label paper in hot water and then quickly tear it off. The method is not considered the most effective, since often the glue remains on the glass and has to be scraped off.
Heat the label with dry, hot air and slowly tear off one centimeter at a time. A hair dryer turned on at full power can act as a source of flow.

After cleaning the glass, it is thoroughly washed and dried. Then the surface of the bottle is wiped with a cotton pad soaked in alcohol. This way the glass will be degreased, which will ensure good “adhesion” to the glue. Tapes are usually pre-cut after measurements are taken.

Master class on decorating wedding bottles with your own hands

You don't have to have any special skills or talent to create a real work of art. The main thing is to have desire, imagination and free time. Select decorative elements taking into account the theme of the celebration, as well as color design and your own imagination. But first, we recommend that you carefully study video master classes online or attend real courses on creating unique jewelry. Specialists will help you decorate the containers on the festive table with your own hands, making it as solemn and unique as possible.

Satin ribbons

The shiny satin ribbon on the bottle looks especially bright. It is beautiful both as a canvas and as a detail. In addition, it is perfect for decorating wedding containers. Moreover, such decor does not have to be black and white. It is quite possible to use ribbons of other delicate shades. To do this you will need:

satin ribbon;
decor;
lace;
rhinestones;
scissors.

To begin, measure and cut the required amount of tape. Apply only a small amount of glue. Then cover the surface, starting from the neck, and gradually go down. Do this as carefully as possible; we recommend gluing the tape in several layers. Mask the joints with another tape. As soon as the champagne is ready, you can safely put it on the gala table.

Bows, contrasting fabrics, brocade and lace also look great in such a situation.

Velvet suits

Velvet looks especially luxurious. This material has excellent stretch, which makes it possible to create mini bottle outfits from it. Velvet can be any color, but it is best to use white fabric for the bride's suit and black for the groom. If you choose a themed, not quite standard wedding, then try to demonstrate this in the decor.

Classic black and white

If you decide to have a classic wedding, we recommend creating black and white bottle decor. This way you will complement the decoration of the celebration. To do this, you can use any type of fabric, just try to stick to a certain style. Choose materials only in black and white. At the same time, you can complement the decor with white artificial pearls or black beads.

Champagne Bride

A wedding is the brightest and most unforgettable celebration. The majority of ceremonial decorations can be made independently. This does not require any talent or skill. Even if you want to decorate bottles at an event in a special way, you don’t have to worry that you won’t succeed. We recommend using bottle decor in the form of a married couple’s outfits.

Regarding the bride, we recommend using a white tulle skirt, a lace corset and velvet elements, also in white. From classic champagne containers you can create a real masterpiece. This exclusive item will become the center of attention at your event. We recommend that the young couple devote the maximum amount of free time to creating a festive atmosphere.

Champagne Groom

Table decor is only gaining popularity every year. Therefore, we advise you not only to decorate the bottle in the form of a groom’s suit, you can make a whole set from a bottle and a couple of glasses.

Regarding the design of the container in the form of a groom, we recommend using black and white fabric and complement the decor with several pearls. This way you can imitate the buttons on the groom's suit. If you want to make the bottle as festive as possible, complement the costume with a boutonniere made of fresh or artificial flowers.

Clothes for champagne made of organza and velvet

Following the master class below, you can decorate champagne for your wedding in an original way with your own hands.

The magnificent clothes of the bride and groom, made with velvet and organza, will certainly attract the attention of all guests to the bottles. This kind of work can be done by any girl who can hold a needle in her hands.

Decorating champagne with your own hands will not take up much of your time.

Necessary materials

To create your own champagne clothes you will need the following materials:

organza for a skirt 30x80 cm;
white satin;
velvet black paper;
black velvet fabric 30x40 cm;
lace 1.8 m;
adhesive tape for finishing edges;
instant glue;
organza for veil;
flesh-colored ribbon 40 cm;
white satin ribbon 2 cm wide, 0.5 m long;
white narrow ribbon 1m long;
rhinestones, beads, artificial flowers for decoration;
wide organza ribbon for bow.

Pattern and creation stages

In those places of the wedding champagne where there will be light fabric, we wrap it with white mounting tape, paper, cardboard, or cover it with paint, and tear off the label. On the bottle symbolizing the groom, we lay a mounting tape along the bottom of the shirt and the collar.
For the bride's corset, we wrap the front of the wedding champagne with a piece of white satin 3-5 cm wide.
We put a body braid around the neck, cross the ends and hide them.
To secure the corset to the champagne for the wedding, we apply adhesive double-sided tape along the edges of the corset on the inside.
Fold the fabric for the skirt so that the bottom part is one third larger than the top.
We sew lace 2.5 cm wide onto the top flounce.
We sew narrow lace onto the hem.
We place a ribbon between the flounces and tighten the skirt at the place of the bottle where the waist is supposed to be.
We distribute the pleats beautifully and sew the skirt to the corset. We sew the edges at the back.
We decorate the corset with lace and sew a bow on the back.
For the cape, cut a piece of fabric 5x28 cm, bend the edges.
We intercept with a narrow braid in the middle and connect with a ring.
We put it around the neck and secure it at the back with glue.
We cut a piece of organza for the veil 30 cm long, 25 cm wide. We assemble it by stepping back from the edge by 10 cm with a thread and tighten it.
We tie a braid or a string of beads to the head, and attach a veil. The bride's clothes are ready.
To make champagne clothes for the groom with your own hands, we wrap the bottle with paper, then you need to draw the outlines of the suit.
To make trousers, sew black velvet 8 cm wide, 27 cm long, add a seam allowance.
We hem the bottom edge, turn it inside out, and put the trousers on the champagne. We lay a white braid along the top edge and sew it to the trousers.
We lay a small piece of white fabric along the front of the neck and secure it with adhesive tape.
We attach a body tape to the neck. Below we wrap the neck of the champagne with a satin white ribbon, hiding the ends at the back. For the collar, we throw a 20 cm white ribbon, cross it on the chest, and secure the ends with glue.
We cut out a frock coat from velvet according to the pattern, connect its parts, and sew a white ribbon on the front.
At the top of the coat, on the wrong side, we make four small darts so that the garment fits well.
Let's try on a tailcoat.
We cut out a velvet collar and glue a white ribbon along its edges. Glue the collar to the champagne.
We make a bow tie from ribbon, a black top hat from velvet paper and two buttons. We dress champagne in ready-to-wear clothes.

How to make champagne “bride and groom”

Many couples who are going to celebrate their wedding order its decoration from professional agencies, since it is not always possible to find time for preparation. Therefore, they do not think about what decorative elements will be on the table. But those couples who are serious about their special day and want to choose all the items and decorations for their wedding themselves also make their own decorative items.

Girls especially love preparing their wedding, because it’s such a pleasant chore, and it’s a pleasure to do it. It is for such girls that there are various lessons on making small beautiful decorative elements. These are champagne bottles made in the style of the bride and groom. Before you start decorating the bottles, you need to decide which champagne will be decorated, choose the bottle shape you like and only then start decorating. Also, if a couple decides to get married, but they already have a child, you can take a small bottle and decorate it in the style of a little boy or girl.

Necessary materials for decoration

After all the necessary bottles have been purchased, tools and decorations are purchased. Typically, champagne clothes are made from bias tape, a material that resembles ribbons. They are easy to envelop champagne, and it is very easy to find colors in the style of the bride and groom. Of course, according to custom, the main colors at a wedding are black and white, but if young people wish, they can change this tradition and make the clothes brighter.

To decorate the bottles, you will also need lace, which will decorate the bride bottle, glue and additional decorations (bows, rhinestones or decorative flowers). You can use satin ribbon instead of binding, but it is worth noting that the binding stretches, and this will help to decorate the bottle beautifully, while satin does not stretch, so it will be harder to decorate with it. Many craftsmen advise decorating clothes for bottles using a glue stick, because it is this that does not leave obvious marks and sticks the fabric to the bottle well.

Bottle preparation

So, first you need to decide what outfit the bottles will have, its color and approximate execution. After this, two bottles should be left in water for an hour so that the labels can be easily removed. When the bottles are clean, you need to glue a small piece of lace on top, it will act as the beginning of the dress.

Decorating bottles of champagne “bride and groom”

Next, you need to take bias tape (white or beige) and glue it to the base of the lace, then weave the tape in parallel oblique lines, so you need to cover the entire bottle, starting from the base of the lace and ending with the wide bottom of the bottle. Don’t forget to lubricate each strip of tape with glue so that they don’t eventually come off. Each strip of binding needs to be joined at the end, and the excess fabric can be cut off.

At the moment when the entire bottle has already been pasted over, and a few centimeters of the wide bottom remain, the tape can be glued on in exactly one continuous piece. At the very bottom of the bottle you need to put a lace bow with an elastic band. The elastic must be strong so that the hem of the dress does not fly off. You can either make this hem yourself, or simply put on a beautiful lace elastic band and decorate it with a gold frill. But in order for the hem not to fall off, it needs to be attached to the binding with a thread, it can be a transparent thread or of such a color that it will not be noticeable.

You can also glue a golden ribbon onto the lace on top of the bottle, and glue rhinestones or other decorative elements onto it using a glue gun. This makes it look like there is a necklace on the bottle. Well, at the very end you need to make a veil, for this you need to take a wide lid from some kind of drink and glue white transparent material to it in the shape that you like best.

The groom bottle is no different from the bride and is made in exactly the same way, the only thing is that the first few turns of the tape are made white, and all the rest are black. This will give the impression that the bottle is in a white shirt. For the groom's hat, you can use an oblong cork, but it needs to be cylindrical and wrapped with black tape. If desired, the groom can wear a tie, stick rhinestones in the form of jacket buttons, and attach a small flower to his hat.

Now the bride and groom are ready, you can add or change something to your taste, this will only make the appearance of the bottles better. A small bottle must be done exactly like the large ones, depending on whether the wife and husband have a daughter or a son. You can change colors and add other decoration elements. To choose a suitable option for the bride and groom, you can look at photos of completed work and, focusing on them, create your masterpiece.

More wedding ideas

Wedding bottles:

Champagne “green apple”:

Decoration of glasses and bottles:

Painted wedding glasses:

Clothespin "Bride and Groom"

Glasses with roses:

Ring basket:

Ring pad

Another cushion for rings:

Wedding sieve:

Wedding garter

Wedding invitations

Bonbonnieres for guests

In order not to forget the address of the page and share with friends, add it to your social networks: Do you want to know news about competitions or master classes?
Tags: Wedding, Bottle decoration

Attention! It is better to write urgent questions in the comments on the website (form at the bottom of the page) or, better yet, directly by email. There are no notifications about comments from the VKontakte form! This form is more for feedback.

Discussion: 9 comments

Lizaveta Koroleva:
May 14, 2015 at 6:46 pm
What wonderful outfits! I would even leave these as a souvenir) My friend and I also decorated bottles for the wedding, but the bottles themselves gave us an idea for inspiration - they took Lev Golitsyn’s coronation - there is a black and red bottle, pleasant, rich colors. The black one was decorated with a matte red bow and beautiful beads, and the red one was decorated with white ribbons (a little like what they did here in the master class). It turned out very elegant and unusual